SN75ALS130
description
The SN75ALS130 quadruple line driver is designed to meet the IBM 360/370 I/O specification GA22-6974-3. The output voltage is 3.11 V minimum (at IOH =
- 59.3 m A) over the remended ranges of supply voltage (4.5 V to 5.95 V) and temperature. Driver outputs use a fault-detection current-limit circuit to allow high drive current but still minimize power dissipation when the output is shorted to ground. The SN75ALS130 is patible with standard T TL logic and supply voltages.
FUNCTION TABLE
INPUTS G† A
OUTPUTS Y F† W
LX XL HH HH
LH LH HH SL
H = high level, L = low level, X = irrelevant, S = shorted to ground † G and F are mon to the four drivers. If any of the four Y outputs is shorted, the fault flag will respond.
The SN75ALS130 employs the IMPACT™ process to achieve fast switching speeds and low power dissipation. Fault-flag circuitry is designed to sense and signal a line short on any Y line. Upon detecting an output fault condition, the fault-flag circuit...
